Lenovo 6241, Installation And Service Manual

Page: 157 / 1990

asu set SYSTEM_PROD_DATA.SysInfoUUID
uuid
--host
ipaddress
[--user
userid
][--password
password
]
where:
uuid
is the user-assigned hexadecimal value, up to 16 bytes, that identifies the server.
ipaddress
is the external LAN IP address of the IMM.
userid
is the IMM account name (1 of 12 accounts). The default is USERID.
password
is the IMM account password (1 of 12 accounts). The default is PASSW0RD (with a zero, not the letter
O).
To update the DMI/SMBIOS data, complete the following steps:
Step 1. In the ASU command-line interface, enter the following command:
asu set SYSTEM_PROD_DATA.SysInfoProdName
xxxxyyy
--host
ipaddress
[--user
userid
][--password
password
]
where:
xxxx
is the 4-digit machine type of the server.
yyy
is the 3-digit model number of the server.
ipaddress
is the external LAN IP address of the IMM.
userid
is the IMM account name (1 of 12 accounts). The default is USERID.
password
is the IMM account password (1 or 12 accounts). The default is PASSW0RD (with a zero, not
the letter O).
Step 2. Enter the following command:
asu set SYSTEM_PROD_DATA.SysInfoSerialNum
zzzzzzz
--host
ipaddress
[--user
userid
][--password
password
]
where zzzzzzz is the 7-character serial number of the server.
Step 3. Enter the following command:
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
--host
ipaddress
[--user
userid
][--password
password
]
where aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa is the 33-character asset tag number of the server.
Chapter 3
.
Configuration information and instructions
143