Lenovo 6241, Installation And Service Manual

Page: 945 / 1990

Prefix: PLAT ID: 0168
User Response
At the next maintenance opportunity:
1. Verify that the most recent eXFlash DIMM firmware and eXFlash IPMI Proxy Service are installed.
2. If the node has recently been installed, moved, serviced, or upgraded, verify that the eXFlash
DIMM is properly seated and visually verify that there is no foreign material in any DIMM
connector on that memory channel. If either of these conditions is found, correct and retry with
the same eXFlash DIMM. (Note: Event Log may contain a recent 00580A4 event denoting
detected change in DIMM population that could be related to this problem.)
3. Check IBM support site for an applicable service bulletin or firmware update that applies to this
eXFlash error.
4. If problem persists and there are no other eXFLash DIMMs with the same indication, confirm that
the eXFlash DIMM is under warranty before replacement.
Related links
– Server features and specifications
– Removing a compute book
– Replacing a compute book
– Removing the compute book cover
– Replacing the compute book cover
– Removing a memory module
– Replacing a memory module
– eXFlash DIMMs
• 806f0221-0b01ffff : Package installed in slot [PhysicalConnectorElementName] for system
[ComputerSystemElementName].
IMM has detected that a card was was Installed in a PCIe slot 1.
May also be shown as 806f02210b01ffff or 0x806f02210b01ffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0334
User Response
Information only; no action is required.
• 806f0221-0b02ffff : Package installed in slot [PhysicalConnectorElementName] for system
[ComputerSystemElementName].
IMM has detected that a card was was Installed in a PCIe slot 2.
May also be shown as 806f02210b02ffff or 0x806f02210b02ffff
Severity
Info
Appendix C. Integrated management module II (IMM2) error messages
931