Lenovo 6241 Installation And Service Manual Download

Page: 1946 / 1990

Explanation:

The firmware image capsule signature for the non-booted flash bank is invalid. Opposite

Bank CRTM Capsule Update Signature Invalid

Severity

Info

User Response

Complete the following steps:

1. Reflash backup UEFI image.

2. If error does not persist no additional recovery action is required.

3. If error persists, or boot is unsuccessful, replace the standard I/O book.

•

I.3818003 The CRTM flash driver could not lock the secure flash region. CRTM Could not lock

secure flash region

Explanation:

The CRTM flash driver could not lock the secure flash region. CRTM Could not lock secure

flash region

Severity

Info

User Response

Complete the following steps:

1. If system failed to boot successfully, DC cycle system.

2. If system boots to F1 setup, flash UEFI image and reset bank to primary (if required). If system

boots without error, recovery is complete and no additional action is required.

3. If system fails to boot, or if flash attempt fails, replace the standard I/O book

•

I.3868000 BOFM: System reset performed to reset adapters. BOFM: System reset performed to

reset adapters

Explanation:

BOFM: System reset performed to reset adapters. BOFM: System reset performed to reset

adapters

Severity

Info

User Response

Complete the following steps:

1. No user required for this event. This is for informational purposes only.

•

I.3868003 BOFM: Configuration to large for compatibility mode. BOFM: Configuration too large for

compatibility mode

Explanation:

BOFM: Configuration to large for compatibility mode. BOFM: Configuration too large for

compatibility mode

Severity

Info

User Response

Complete the following steps:

1. No user required for this event. This is for informational purposes only.

•

I.58015 Memory spare copy initiated. Spare Copy Started

Explanation:

Memory spare copy initiated. Spare Copy Started

Severity

Info

1932

System x3850 X6 and x3950 X6 Installation and Service Guide

«
...
1944
1945
1946
1947
1948
...
»

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands

Lenovo 6241, Installation And Service Manual

Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands