Lenovo 6241 Installation And Service Manual Download | Manualshive

Page: 254 / 1990

background image

Drive tray
assembly

Release
latch

1.8-inch
filler panel

Step 4. If you are instructed to return the drive assembly, follow all packaging instructions, and use any

packaging materials for shipping that are supplied to you.

Replacing 2.5-inch and 1.8-inch hot-swap drives

This information provides instructions for replacing the 2.5-inch and 1.8-inch hot-swap drives.

The following notes describe the type of drives that the server supports and other information that you must
consider when you install a drive. For a list of supported drives, see

http://www.lenovo.com/serverproven/

• Locate the documentation that comes with the drive and follow those instructions in addition to the

instructions in this section.

• Make sure that you have all the cables and other equipment that are specified in the documentation that

comes with the drive.

• The server can support up to eight 2.5-inch drives, up to 16 1.8-inch drives, or a combination of both 2.5-

inch and 1.8-inch hot-swap drives, using the supported SAS\SATA backplane configurations. The server
supports 2.5-inch hot-swap SAS or hot-swap SATA hard disk drives, 2.5-inch hot-swap solid state drive,
or 1.8-inch hot-swap solid state drives (see “Supported drive backplane configurations” on page 69 for
more information).

• You can mix 2.5-inch hot-swap SAS and SATA hard disk drives, 2.5-inch hot-swap solid state drive, and

1.8-inch hot-swap solid state drives in the same server as long as they are not on the same array.

• When you mix drive backplane configurations, all 1.8-inch SSD drive backplanes must be installed above

the all 2.5-inch drive backplanes. See “Drive IDs” on page 67 for drive ID assignment information and
“Supported drive backplane configurations” on page 69 for information about the combination of
supported drive backplane configurations.

• The electromagnetic interference (EMI) integrity and cooling of the server are protected by having all bays

and PCI Express slots covered or occupied. When you install a drive, save the EMC shield and filler panel
from the bay in the event that you later remove the device.

• For a complete list of supported optional devices for the server, see

http://www.lenovo.com/serverproven/

.

To install a hot-swap drive, complete the following steps:

240

System x3850 X6 and x3950 X6 Installation and Service Guide

«
...
252
253
254
255
256
...
»

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 6241

8BIG RACK THUNDERBOLT 2

Brand: LaCie Pages: 28

DIGITAL Server 9100 Series

Brand: Digital Equipment Pages: 68

R120d-1E N8100-1954F

Brand: NEC Pages: 166

InterServe 80 SL

Brand: Intergraph Pages: 106

Brand: TRENDnet Pages: 2

Brand: TRENDnet Pages: 2

TEW-P1UG - Wireless Print Server

Brand: TRENDnet Pages: 2

Brand: TRENDnet Pages: 15

Usb Peripheral Server/5

Brand: Black Box Pages: 10

Brand: Black Box Pages: 3

Brand: Tibbo Pages: 21

Brand: Meinberg Pages: 82

Brand: IBM Pages: 108

Brand: Ampair Pages: 26

Brand: Riva Pages: 20

Brand: Lantronix Pages: 68

Brand: Oracle Pages: 6

Exadata Storage Server X6-2 High Capacity

Brand: Oracle Pages: 70

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands