Lantech LGS-2816C-RPS, User Manual

Page: 140 / 248

C
ONFIGURING
T
ACACS+
(Terminal Access Controller Access-Control System Plus)
is a protocol which provides access control for the switch via one or
more centralized servers. It provides separate authentication,
authorization and accounting services. utilizes TCP port
49. It consists of three separate protocols, which can, if desired, be
implemented on separate servers.
W
EB
I
NTERFACE
To display the State Configuration:
1.
Click , State.
2.
Specify the Server IP Address 1, 2 and Secret Key field.
3.
Click Save.
Figure 4-64: Configure State
P
ARAMETERS
These parameters are displayed on the State page:

Server IP Address 1 ,2 – Specify the Server 1 and 2 IP
Address in the field. Server 1 IP address for authentication. Default:
0.0.0.0

Secret Key – Specify the Secret key field. The secret key between
authentication server and authenticator. It is a string with the length
1 – 31 characters. The character string may contain upper case,
lower case and 0-9. It is character sense. It is not allowed for
putting a blank between any two characters. Default: TACACS.
T
ACACS+
S
TATE
C
ONFIGURATION
The switch supports the is facilitated through AAA and
can be enabled only through AAA commands which detailed
accounting information and flexible administrative control over
authentication and authorization processes. Providing to set
Server IP address and Secret Key.