Lantech LGS-2816C-RPS, User Manual

Page: 151 / 248

W
EB
I
NTERFACE
To display the TRUNK System Priority Configuration:
1.
Click TRUNK, LACP System Priority.
2.
Specify the System Priority value between 1 to 65535.
3.
Click Apply.
Figure 4-71: Display the TRUNK System Priority configuration
P
ARAMETERS
These parameters are displayed on the Trunk System Priority page:

System Priority – Specify the System Priority part of a system ID
field.The Ragne is (1-65535) and Default is 32768.

Apply – Save the setting to switch flash memory.
T
RUNK
L
ACP
S
YSYTEM
P
RORITY
C
ONFIGURATION
The Function is used to set the priority part of the LACP system ID.
LACP will only aggregate together the ports whose peer link
partners are all on a single system. Each system supports LACP will
be assigned a globally unique System Identifier for this purpose. A
system ID is a 64-bit field comprising a 48-bit MAC Address and
16-bit priority value. The System Priority can be set by the user.
Its range is from 1 to 65535. Default: 32768.