Lantech LGS-2816C-RPS, User Manual

Page: 176 / 248

–
349 –
C
HAPTER
8
| Commands of CLI
Alarm Commandsof CLI
P
ARAMETERS
These parameters are displayed on the IGMP Mode page:

IGMP Mode – Set IGMP mode: Disable , Proxy, Snooping. Default is
―Disabled‖.
WEB INTERFACE
To display the set IGMP Proxy Configuration:
1.
Click Proxy.
2.
Specify the General Query Interval, General Query Response
Timeout, General Query Max Response Time, Last Member Query
Count, Last Member Query Interval and Last Member Query Max
Response Time field the specific value.
3.
Select Router Port member.
4.
Click Apply.
Figure 4-85 : Display the IGMP Proxy Configuration
P
ARAMETERS
These parameters are displayed on the IGMP Proxy Configuration page:
IGMP PROXY
CONFIGURATION
IGMP proxy enables the switch to issue IGMP host messages on
behalf of hosts that the system discovered through standard IGMP
interfaces. The switch acts as a proxy for its hosts. You enable
IGMP proxy on the switch, which connects to a router closer to the
root of the tree. This interface is the upstream interface. The
router on the upstream interface should be running IGMP.