Lantech LGS-2816C-RPS, User Manual

Page: 158 / 248

W
EB
I
NTERFACE
To display the Spanning Tree Port Configuration:
1.
Click STP, Port.
2.
You need enable the STP first and the screen will show all
detail of system port STP status
3.
Click Edit to modify the port STP parameters configuration.
4.
Click MCheck to check the port STP parameters setting.
N
OTE
:
You need to enable the STP or RSTP function first and
without it then the Edit and MCheck Button is unavailable.
Figure 4-74 : Display the Spanning Tree Port Configuration
S
PANNING
T
REE
P
ORT
C
ONFIGURATION
The Function is used for user to Configure STP Port Setting, one
item selection and five parameters settings are offered for user‘s
setup. User can disable and enable each port by selecting each
Port Status item. User also can set ―Path Cost‖ and ―Priority‖ of
each port by filling in the desired value and set ―Admin Edge Port‖
and ―Admin Point To Point‖ by selecting the desired item.