Lantech LGS-2816C-RPS, User Manual

Page: 230 / 248

vid - The VLAN to filter for this rule. (Range: 1-4094, or any )
tag_prio - Specifies the User Priority value found in the VLAN tag
(3 bits as defined by IEEE 802.1p) to match for this rule. (Range: 0-7, or
any )
dmac_type - The type of destination MAC address. (Options: any ,
unicast , multicast , broadcast ; Default: any )
any – all frame type.(Options: any , Ethernet type , arp , ipv4 ; Default:
any )
etype
– Set Frame Type to Ethernet Type
etype
- This option can only be used to filter Ethernet II formatted
packets. (Range: 0x600-0xffff hex, or any ; Default: any )
smac
- Source MAC address (xx-xx-xx-xx-xx-xx) or any .
arp
– Set Frame Type to arp
arp type
- Specifies the type of ARP packet.(Option: any , ARP , RARP ,
Other ; Default: any )
opcode
– Frame mush have ARP Request or RAPR Request. (Option: any ,
ARP , RARP ; Default: any )
source ip/source ip mask
– Source IP address o r any .
destination ip/ destination ip mask -
Destination IP address o r any .
arp smac match flag -
ARP frame where sender hardware address (SHA)
field is equal to the SMAC address.(Option: any , 0 , 1 ; Default: any )
rarp dmac match flag -
RARP frames where target hardware address (THA)
is equal to the SMAC address. (Option: any , 0 , 1 ; Default: any )
ip/ethernet length flag - ARP/RARP frames where the hardware address
length (HLN) is equal to Ethernet (0x06) and the protocol address
length (PLN) is equal to IPv4 (0x04). (Option:
any , 0 , 1 ; Default: any )
ip flag -
ARP/RARP frames where the hardware address space (HRD) is
equal to Ethernet (1). (Option: any , 0 , 1 ; Default: any )
ethernet flag -
Frames can be matched according to their ARP/RARP
protocol address space (PRO) settings. (Option: any , 0 , 1 ; Default: any )
ip – set Frame Type to IPv4 .
source ip / source ip mask - Source IP address o r any .
destination ip / destination ip mask - Destination IP address o r any .
ip ttl - Time-to-Live flag with any value. (Option: any , Zero , Non-