Lantech LGS-2816C-RPS, User Manual

Page: 28 / 248

P
ANEL
D
ISPLAY
The web agent displays an image of the switch‘s ports. The refresh mode
is auto-mode by default. Clicking on the image of a port opens the
Detailed Statistics page as described on page 143 .
Figure 2: Front Panel Indicators
M
AIN
M
ENU
Using the onboard web agent, you can define system parameters,
manage and control the switch, and all its ports, or monitor network
conditions. The following table briefly describes the selections available
from this program.
Table 4: Main Menu
Menu Description Page
Configuration
System
System
Information
Configures Location, Contact and Device Name
Account Configures User Account and Password
Time Configures SNTP and System Time settings
IP Configuration Configures IPv4 settings
Loop Detection Configures Loop Detection
Management
Policy
Configures Management Policy
Syslog Configures Syslog parameters
Virtual Stack Configures the Virtual Stack for Switch Management
Port
Configuration Configures port parameters settings
Status Display port status
Simple Counter Display port simple counter
Detail Counter Display port detail counter
Power Saving Configures port power saving settings
Vlan
Vlan mode Configures VLAN Mode with port-base, tag-base..etc
Tag-based
Group
Configures Tag-based VLAN Group parameters setting
Port-based
Group
Configures Port-based VLAN Group parameters setting
Ports
Configures VLAN Port detail parameters setting