Lantech LGS-2816C-RPS, User Manual

Page: 225 / 248

SYNTAX
action <por> < permit | deny > <rate_limiter> <port copy >
port - 1-24. (Range: 1-24)
permit/deny – permit:1, deny:0. (Range: 0-1)
rate_limiter – 0-16(0:disable). (Range: 0-16)
port copy – 0-24(0:disable). (Range: 0-24)
DEFAULT SETTING
None
EXAMPLE
arp type: Request/Reply (opcode): any
source ip: any
destination ip: 255-255-255-255
ARP flag
ARP SMAC Match: any
RARP DMAC Match: any
IP/Ethernet Length: any
IP: any
Ethernet: any
action: 1
rate limiter: 3
copy port: 0
action
This command set the access control per port as packet filter action rule.
LGS-2816C-RPS(acl)# action 5 0 2 2
LGS-2816C-RPS(acl)# show
port policy id action rate limiter port copy counter
---- --------- ------ ------------ --------- ------------
1 1 permit 1 1 0
2 1 permit 1 1 71959
3 1 permit 1 1 0
4 1 permit 1 1 0
5 1 deny 2 2 0
6 1 permit 1 1 0
7 1 permit 1 1 0
8 1 permit 1 1 0
9 1 permit 1 1 0
10 1 permit 1 1 0
11 1 permit Disabled Disabled 0
12 1 permit Disabled Disabled 0
13 1 permit Disabled Disabled 0
14 1 permit Disabled Disabled 0
15 1 permit Disabled Disabled 0