Lantech LGS-2816C-RPS, User Manual

Page: 231 / 248

Zero ; Default: any )
ip fragment – Specifies the fragment offset settings for this rule. (Option:
any , Yes , No ; Default: any )
ip option -
Options flag with any value. (Option: any , Yes , No ; Default:
any )
icmp – Set IP Protoclo Filter to ICMP
icmp type - ICMP type number (0-255) or any .
icmp code - ICMP code number (0-255) or any .
udp - Set IP Protoclo Filter to ICMP
source port range - Source UDP port/range (0-65535) or any .
destination port range – Destination UDP port/range (0-65535) or any .
tcp -
Set IP Protoclo Filter to TCP
source port range - Source TCP port/range (0-65535) or any .
destination port range - Destination TCP port/range (0-65535) or any .
tcp fin flag - TCP frames with any value in the FIN field. (Option: any , 0 ,
1 ; Default: any )
tcp syn flag - TCP frames with any value in the SYN field.(Option: any , 0 ,
1 ; Default: any )
tcp rst flag - TCP frames with any value in the RST field. (Option: any , 0 ,
1 ; Default: any )
tcp psh flag
- TCP frames with any value in the PSH field. (Option: any , 0 ,
1 ; Default: any )
tcp ack flag - TCP frames with any value in the ACK field. (Option: any , 0 ,
1 ; Default: any )
tcp urg flag - Specifies the TCP ―Urgent Pointer field significant‖ (URG)
value for this rule. (Option: any , 0 , 1 ; Default: any )
other - Set IP Protocol Filter to other
ip protocol value - IP protocol value (0-255)
action – Permit or deny packet.(0 deny, 1 permit)
rate limiter - Specifies a rate limiter.(0 disable, 1-16)
port copy - Defines a port to which matching frames are copied.(0 disable,
1-24)