Lantech LGS-2816C-RPS, User Manual

Page: 110 / 248

W
EB
I
NTERFACE
To configure SNMP Trap Hosts setting:
1.
Click SNMP, Trap Hosts.
2
. Display the SNMP Trap Hosts information table.
3.
Choice a entry to display and modify the detail parameters or
click delete button to delete the trap hosts entry.
Figure 4-47: Set up SNMP Trap Hosts
P
ARAMETERS
These parameters are displayed on the SNMP Trap Hosts Setting page:

Delete – If you had create a new SNMP Trap Hosts entry then you
could click Delete button to delete the entry.
T
RAP
H
OSTS
C
ONFIGRATION
The function is used to configure SNMP trap. To create a new trap
account, please check <No number> button, and enter the trap
information then check <Apply>. Max Group Number : 6.