Lantech LGS-2816C-RPS, User Manual

Page: 180 / 248

–
346 –
C
HAPTER
8
| Commands of CLI
Alarm Commandsof CLI
W
EB
I
NTERFACE
To display the set of MVR configuration :
1.
Click MVR.
2.
Select MVR Enable or None. (None is Disable).
3.
Specify the Host Time Out field the specific value.
4.
Select Fast Leave member and Router Port member.
5
. Click Apply.
Figure 4-89: Display the MVR Configuration
P
ARAMETERS
These parameters are displayed on the MVR Configuration page:

MVR Enable – Set the MVR function enable. Default is ―Disabled‖.

Host Time Out – Set the MVR function enable and the Host packet
received by Switch timeout period. The unit is second and time range
is from 1 to 65535. The default is 125 seconds.

Fast Leave – Set which port want to enable the Fast leave mode with
IGMP snooping mode.
MVR
CONFIGRATION
Multicast VLAN Registration (MVR) routes packets received in a
multicast source VLAN to one or more receive VLANs. Clients are
in the receive VLANs and the multicast server is in the source
VLAN. Multicast routing has to be disabled when MVR is enabled.
Refer to the configuration guide at Understanding Multicast VLAN
Registration for more information on MVR.