Lantech LGS-2816C-RPS, User Manual

Page: 108 / 248

W
EB
I
NTERFACE
To configure SNMPv3 Accesses setting:
1.
Click SNMP, Accesses.
2
. Click Add new Access.
3.
Specify the SNMP Access parameters.
4.
Click Save.
5.
If you want to modify or clear the setting then click Reset.
Figure 4-46: Set up SNMP Accesses
P
ARAMETERS
These parameters are displayed on the SNMP Accesses Setting page:

Delete – If you had create a new SNMP Accesses entry then you
could click Delete button to delete the entry.

Group Name
–
Scroll the Group Name that you set on the switch
already. The length of ―Group Name‖ string is restricted to 1-32.

View Type – Scroll to choice the View Type as included or excluded.

Security Model – Scroll to choice the security Model as below four
models:
any: Accepted any security model(v1|v2c|usm).
v1: SNMPv1.
v2c: SNMPv2c.
usm: User-based Security Model.

Security Level – Scroll to choice the three levels as below:
NoAuth, NoPriv : No authentication and no privacy.
Auth, NoPriv: Authentication and no privacy.
SNMPv3 A
CCESSES
C
ONFIGRATION
The function is used to configure SNMPv3 accesses. The Entry index
key are Group Name, Security Model and Security level. To create a
new access account, please check < Add new access > button, and
enter the access information then check < Save >. Max Group
Number : 14.