Lantech LGS-2816C-RPS, User Manual

Page: 153 / 248

W
EB
I
NTERFACE
To display the Spanning Tree Protocol Status:
1.
Click STP, Status.
2.
Display all Spanning Tree Protocol detail parameter data.
Figure 4-72: Display the Spanning Tree Protocol STATUS
P
ARAMETERS
These parameters are displayed on the Spanning Tree Protocol Status page:

STP State – Show the current STP Enabled / Disabled status.
Default is ―Disabled‖.

Bridge ID - Show switch‘s bridge ID which stands for the MAC
address of this switch.

Bridge Priority - Show this switch‘s current bridge priority setting.
Default is 32768.

Designated Root - Show root bridge ID of this network segment. If
this switch is a root bridge, the ―Designated Root‖ will show this
switch‘s bridge ID.

Designated Priority - Show the current root bridge priority.

Root Port - Show port number connected to root bridge with the
lowest path cost.

Root Path Cost - Show the path cost between the root port and the
S
PANNING
T
REE
P
ROTOCOL
S
TATUS
V
IEW
The Function is used for user to monitor the STP Status. In the
Spanning Tree Status, user can read 12 parameters to know STP
current status. The 12 parameters‘ description is listed in the
following table.