Lantech LGS-2816C-RPS, User Manual

Page: 192 / 248

–
350 –
C
HAPTER
8
| Commands of CLI
Alarm Commandsof CLI
C
ONFIGURING
L
INK
L
AYER
D
ISCOVERY
P
ROTOCOL
The switch supports the LLDP. For current information on
your switch model, The Link Layer Discovery Protocol (LLDP)
provides a standards-based method for enabling switches to
advertise themselves to adjacent devices and to learn about
adjacent LLDP devices.
W
EB
I
NTERFACE
To configure LLDP:
1.
Click LLDP, LLDP State.
2.
Modify LLDP timing parameters.
3.
Set the required mode for transmitting or receiving LLDP messages.
4.
Specify the information to include in the TLV field of advertised
messages.
5.
Enable or disable Notification.
6.
Click Save.
Figure 4-98 : LLDP Configuration
LLDP STATE
Configuration
The LLDP state function, you can set per port the LLDP
configuration and the detail parameters, the settings will take
effect immediately