Lantech LGS-2816C-RPS, User Manual

Page: 148 / 248

W
EB
I
NTERFACE
To display the TRUNK Aggregator View:
1.
Click TRUNK, Aggregator View.
2.
Click Refresh to refresh the Trunk data
.
3.
Click LACP Detail to show detail LACP status
.
Figure 4-69: Display the TRUNK Aggregator View
C
AUTION
:
Alerts you before you configure the port to join the LACP
trunk group and click LACP Detail then the switch will pop-up a alarm
screen. It will show: Please select an LACP aggregator with at leaset
one member port.
P
ARAMETERS
These parameters are displayed on the Aggegator view page:

Aggregator – It shows the aggregator ID (from 1 to 24) of every
port. In fact, every port is also an aggregator, and its own
aggregator ID is the same as its own Port No.

Method - Show the method a port uses to aggregate with other
ports.

Member Ports - Show all member ports of an aggregator (port).
T
RUNK
A
GGREGATOR
V
IEW
The function provides user to Show the Tunk Port Detail
information. User could monitor the current port trunking
information from the aggregator point of view.