Lantech LGS-2816C-RPS, User Manual

Page: 74 / 248

– 92 –
C
HAPTER
4
| Configuring the Switch
Configure SNMP
C
ONFIGURING
M
ANAGEMENT
V
LAN
To assign a specific VLAN for management purpose. The management
VLAN is used to establish an IP connection to the switch from a
workstation connected to a port in the VLAN. This connection supports
a VSM, SNMP, and Telnet session. By default, the active management
VLAN is VLAN 1, but you can designate any VLAN as the management
VLAN using the Management VLAN window. Only one management
VLAN can be active at a time.
When you specify a new management VLAN, your HTTP connection to
the old management VLAN is lost. For this reason, you should have a
connection between your management station and a port in the new
management VLAN or connect to the new management VLAN through a
multi-VLAN router
W
EB
I
NTERFACE
To Configure the Management VLAN in the web interface:
1.
Click VLAN, Management VLAN.
2.
Specify Management VLAN ID
.
0~ 4094
3.
Click Apply
Figure 4-21 : Management VLAN Configuration
P
ARAMETERS
These parameters are displayed on the Management VLAN Configuration page:

VID - Specific Management VLAN ID.