Lantech LGS-2816C-RPS, User Manual

Page: 91 / 248

C
ONFIGURING
R
ATE
L
IMITERS
Each port includes an ingress policer, and an egress shaper, which can limit the
bandwidth of received and transmitted frames. Ingress policer or egress shaper
operation is controlled per port in the Rate Limit Configuration.
W
EB
I
NTERFACE
To display the QoS Rate Limiters Configuration in the web interface:
1.
Click QoS, Rate limiters.
2.
To set an rate limit on ingress traffic, check Policer Enabled box next
to the required port, set the rate limit in the Policer Rate field, and
select the unit of measure for the traffic rate.
3.
To set an rate limit on egress traffic, check Shaper Enabled box next
to the required port, set the rate limit in the Shaper Rate field, and
select the unit of measure for the traffic rate.
4
.
Scroll the Ingress and Egress Unit with kbps or Mbps
5.
Click Apply
Figure 4-32: Display QoS Rate Limiters Configuration
P
ARAMETERS
These parameters are displayed on the QoS Rate Limiter page:

Port # – Display the Port Index.

Ingress Shaper Enabled – Evoke to enable the Ingress rate
limiter rule.

Ingress Shaper Rate (rule) - Configures the rate for the port
shaper.
(Range: 500-1000000 kbps, or 1-1000 Mbps; Default: 500 kbps)

Ingress Shaper Unit – Sets the unit of measure for the port
shaper. (Options: kbps, Mbps; Default: kbps)