Lantech LGS-2816C-RPS, User Manual

Page: 209 / 248

Table 5-1: 802.1X Commands
SYNTAX
set maxReq < port-range > < vlaue >
port range - syntax 1,5-7, available from 1 to 24
value - max-times , range 1-10
DEFAULT SETTING
Value
– 2
5
802.1X Commands of CLI
Command
Function
set maxReq
set mode
set port-control
set quietPeriod
set reAuthEnabled
set reAuthMax
set reAuthPeriod
set serverTimeout
set auth-server
set suppTimeout
set txPeriod
show status
show port-config
show statistics
show server
Set 802.1X maxReq
Set 802.1X mode
Set 802.1X port control
Set 802.1X quietPeriod
Set 802.1X reAuthEnabled
Set 802.1X reAuthMax
Set 802.1X reAuthPeriod
Set 802.1.X serverTimeout
Set 802.1X authentication server
Set 802.1X suppTimeout
Set 802.1X txPeriod
Display 802.1X status
Display 802.1X port configuration information
Display 802.1X statisctics
Display 802.1X server information
set maxReq The maximum number of times that the state machine will retransmit
an EAP Request packet to the Supplicant before it times out the
authentication session.