Lantech LGS-2816C-RPS, User Manual

Page: 60 / 248

C
ONFIGURING
D
ETAIL
C
OUNTER
The function of Detail Counter collects any information and provides the
counting about the traffic of the port, no matter the packet is good or
bad.
Each data field has 20-digit long. If the counting is overflow, the counter
will be reset and restart counting. The data is updated every time
interval defined by the user. The valid range is 3 to 10 seconds. The
Refresh Interval is used to set the update frequency. Default update time
is 3 seconds
.
W
EB
I
NTERFACE
To display the Port Detail Counter information in the web interface:
1.
Click Port, Simple Counter.
2.
Display the Port Simple Counter information.
3.
Click Refresh to refresh data or Clear to clear all records
4. Evoke the Auto-refresh then the switch will refresh the data
automatically
Figure 4-14: Port Detail Counter detail information
P
ARAMETERS
These parameters are displayed on the Port Detail Counter page:

Rx Packets - The counting number of the packet received.

Rx Octets - Total received bytes.

Rx High Priority Packets - Number of Rx packets classified as high
priority.

Rx Low Priority Packets - Number of Rx packets classified as low
priority.