Lantech LGS-2816C-RPS, User Manual

Page: 128 / 248

P
ARAMETERS
These parameters are displayed on the Wizard Typical Network Application
Rules Configuration page:

State – Scroll to enable or disable the IP MAC Binding.

Time Interval
-
Range: 10 / 20 / 30, Time interval is for ARP echo,
the switch will according to server table entries to send ARP echo.

Server/Client
-
The maximum number of IP-MAC binding client
table is 512 entries. The maximum number of IP-MAC Binding server
table is 64 entries.

MAC
–
Specify the MAC Address field
.
Six-byte MAC Address: xx-xx-
xx-xx-xx-xx, For example: 00-40-c7-00-00-01
.

IP
-
Specify the IP Address field
.
Four-byte IP Address:
xxx.xxx.xxx.xxx. For example: 192.168.1.100
.

Port No
–
Scroll to choice what Port to Binding with specific MAC
Address and IP Address rule
.

VID
–
Specify the VID field. VLAN ID: 1-4094.

Add - Create a new IP MAC Binding Rule entry
.
Input MAC, IP, Port
and VID, then click on <Add> to create a new entry into the IP MAC
Binding table
.
Figure 4- 56: Set up IP MAC Binding rules
N
OTE
:
It can integrate with DHCP Server and learn the IP Address
and MAC Address to specific Port to dynamic create IP MAC Binding
entry.
You can Click ―Delete‖ to delete a exist entry.