Lantech LGS-2816C-RPS, User Manual

Page: 23 / 248

.
T
RAP
R
ECEIVERS
You can also specify SNMP stations that are to receive traps from the switch.
To configure a trap receiver, enter the ―snmp trap‖ commands shown below,
and press <Enter>.
{For SNMPv1/v2c Trap setting}
“
set trap <index> <version> <IP> <port> <community/security>
”
where ―version‖ indicates the SNMP client version (1, 2c, 3), ―community- string‖
specifies access rights for a version 1/2c host, and ―host-address‖ is the IP
address for the trap receiver. For a more detailed description of these
parameters and other SNMP commands
.
The following example creates a trap
host for a version 1 SNMP client.
>snmp trap version 1
LGS-2816C-RPS(snmp)#
set trap 1 2 192.168.1.10 162 public
LGS-2816C-RPS(snmp)#
LGS-2816C-RPS(snmp)# show trap
SNMPv3 Trap Host Configuration:
No Ver. IP Port Community/Security Security Auth. Priv.
Name Level Protocol Protocol
-- ---- ------------ ---- ------------------ --------- -------- ---------
1 v2c 192.168.1.10 162 public
2
3
4
5
6
LGS-2816C-RPS(snmp)# del trap 1
LGS-2816C-RPS(snmp)#
.
Managed Switch- LGS-2816C-PRS
Login: admin
Passward:*****
LGS-2816C-PRS# config-file
LGS-2816C-PRS(config-file)#
LGS-2816C-PRS(config-file)# export ?
Usage: export <current l user> <ip_address>
LGS-2816C-PRS(config-file)# export user 192.168.20.1
E
XPORT
OR I
MPORT
C
ONFIGURATION
S
ETTINGS
Configuration commands modify the working configuration, and are
exported to a nonvolatile storage. To export the current
configuration settings to a backup server, enter the following
command, and press <Enter>.
― export <current|user> <ip_address>”
where ― ip_address ‖ is the ip address of the backup server, and
― current| user ”
is the name under which the configuration settings
are exported.