Lantech LGS-2816C-RPS, User Manual

Page: 145 / 248

–
163 –
C
HAPTER
4
| Configuring the Switch
Configure SNMP
trunked‖ group.
Per Trunking Group supports a maximum of 12 ready member-ports. Please
note that some decisions will automatically be made by the system while you
are configuring your trunking ports. Some configuration examples are listed
below:
a)
12 ports have already used Static Trunk Group ID 1, the 13th
port willing to use the same Static Trunk Group ID will be
automatically set to use the ―None‖ trunking method and its
Group ID will turn to 0. This means the port won‘t aggregate
with other ports.
b) 14 ports all use LACP Trunk Group ID 1 at most 12 ports can
aggregate together and transit into the ready state.
c) A port using the ―None― trunking method or Group ID 0 will be
automatically set to use the ―None‖ trunking method with
Group ID 0.
W
EB
I
NTERFACE
To display the TRUNK Port Configuration:
1.
Click TRUNK, Port.
2.
Scroll to set the Trunk Port Setting parameters.
3.
Click Apply/ Refresh.
Figure 4-68: Configure TRUNK Port setting
P
ARAMETERS
These parameters are displayed on the Trunk Port page:
T
RUNK
C
ONFIGURATION
The function provides user to set the Tunk Port. The Port
setting/status is used to configure the trunk property of each and
every port in the switch system.