20-18
Appendix > Restrictions
Depending on the condition of
the paper there is a risk that
paper gets in contact with the
print head. This might cause
dirt on the leading edge, paper
jam or dog ears (folded page
corners).
In case of satisfying any of the
following conditions
• Paper which is curled at
concave side of the printing
surface (Especially, post
card, thick paper)
• Paper which is waved due to
the high humidity, etc.
• Paper that the corner is bent
• If the curl is big, set paper
after removing the curl
(Height of the curl: within 5
mm, recommendation: within
3 mm).
• Set paper that the lower curl
side (convex side) should be
printing surface.
• Do not to use waved paper.
• Use paper right after open
the package.
• Paper should be packed in
the wrapping paper after use.
• Paper should keep in the
horizontal condition and
store them avoiding the high
temperature/high
humidity/direct sunlight
• Do not to use paper that the
corner is bent.
―
Adding the user paper profile
can be done from the Fiery
only.
In case of adding the paper
profile from the machine's
controller
A customization request has to
be submitted. The added paper
profiles are reflected after
firmware update.
―
The machine adjustment
parameters can only be edited
from the machine's operation
panel or Command Center RX.
Master paper profile cannot be
edited.
In case of editing the machine
adjustment parameters
―
―
Import/export of the Paper
Catalog cannot be done from
the Fiery controller.
In case if the user who adopted
the Fiery controller wants to
import/export of the Paper
Catalog
Perform import/export of the
Paper Catalog with the panel
operation. For details, contact
our service representative.
―
Depending on the device
configuration and job
condition of the user setting,
there might be the possibility
not able to output to any
output location.
In case of matching the
prohibition rule
―
―
Slight enlarge function,
supported by the Fiery, can be
set only on the job basis.
In case if the user who adopted
the Fiery controller
―
―
Restrictions
Conditions
Corrective Actions
Reference
Page
