18-13
Adjustment/Maintenance Menu > Reducing color dropout and white streaks
4
Perform the nozzle correction.
1
As shown in the illustration, place the printed side down on the platen with the edge with
the arrows toward the back
2
Select [
Start
].
The nozzle correction begins. While nozzle recovery is in progress, the time remaining until
recovery finishes appears.
When recovery finishes, select [
OK
].
NOTE
The printed position of the arrows in the nozzle recovery pattern may be in from the
edge, depending on the size of the pattern. Regardless of the position of the arrows,
place the pattern in the upper left corner of the glass platen.
