manualshive.com logo in svg

Kyocera TASKalfa 620, Service Manual

Share
Download
Kyocera TASKalfa 620 Service Manual Download Page 45

2KN/2KP

1-3-7

(3) Contents of the maintenance mode items

Maintenance

item No.

Description

U000

Printing out an own-status report
Description

Prints out a list of the current settings of all maintenance items, and occurrences of paper jams and service
calls.

Purpose

To check the current setting of the maintenance items, or the occurrences of paper jams and service calls.
Before initializing or replacing the backup RAM, print out a list of the current settings of the maintenance items
so that you can reenter the same settings after initialization or replacement.

Method

1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be output. The selected item is displayed in reverse.

3. Press the start key. The interrupt copy mode is entered and a list is output.

When A4/11" x 8

1/2

" paper is available, a report of this size is output. If not, specify the paper feed loca-

tion.
When output is complete, the screen for selecting an item is displayed.

Completion

Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No.
is displayed.

U001

Exiting the maintenance mode
Description

Exits the maintenance mode and returns to the normal copy mode.

Purpose

To exit the maintenance mode.

Method

Press the start key. The normal copy mode is entered.

U002

Setting the factory default data
Description

Restores the machine conditions to the factory default settings.

Purpose

To move the mirror frame of the scanner to the position for transport (position in which the frame can be fixed).

Method

1. Press the start key. The screen for executing is displayed.
2. Press MODE1(ALL) on the touch panel. It is displayed in reverse.
3. Press the start key.

The mirror frame of the scanner returns to the position for transport.

Completion

Turn the main power switch off.

Display

List to be printed out

MAINTENANCE

List of the current settings of all maintenance items

JAM

List of paper jams

SERVICE CALL

List of service calls

Summary of Contents for TASKalfa 620










































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands