manualshive.com logo in svg

Kyocera TASKalfa 620, Service Manual

Share
Download
Kyocera TASKalfa 620 Service Manual Download Page 109

2KN/2KP

1-3-71

U263

Setting the paper ejection when copying from the DP
Description

Sets whether the copies will be ejected in the same or opposite order as the originals when copying from the
DP.

Purpose

Set according to the preference of the user.

Method

Press the start key. The screen for selecting an item is displayed.

Setting

1. Select the ejection order. The selected item is displayed in reverse.

Initial setting: FACE-DOWN

2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.

Completion

To exit this maintenance item without changing the current setting, press the stop/clear key. 
The screen for selecting a maintenance item No. is displayed.

U264

Setting the display order of the date
Description

Selects year, month and day as the order of that appears on lists, etc.

Purpose

Set according to the user preference.

Method

Press the start key. The screen for selecting an item is displayed.

Setting

1. Select the desired order. The selected item is displayed in reverse.

Initial setting: MONTH-DATE-YEAR (for the inch specifications)
DATE-MONTH-YEAR (for the metric specifications)

2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.

Completion

To exit this maintenance item without changing the current setting, press the stop/clear key. 
The screen for selecting a maintenance item No. is displayed.

Maintenance

item No.

Description

Display

Description

FACE-DOWN (NORMAL)

Face down ejection

FACE-UP (SPEED)

Face up ejection with bitmap copy

FACE-UP (MEMORY)

Face up ejection with memory copy

Display

Description

YEAR-MONTH-DATE

Year/Month/Day

MONTH-DATE-YEAR

Month/Day/Year

DATE-MONTH-YEAR

Day/Month/Year

Summary of Contents for TASKalfa 620










































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands