Kyocera TASKalfa 620, Service Manual

Page: 103 / 521

2KN/2KP
1-3-65
U248
Setting the paper stop timing
1. Select PUNCH POSITION ADJUST at the screen for selecting an item.
2. Change the value using the cursor up/down keys.
If the distance of the position of a punch hole is smaller than the specified value A, increase the preset
value. If the distance is larger than the value A, decrease the preset value.
Changing the value by 1 changes by 1.0 mm.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Displaying the punch-hole scrap count
1. Select PUNCH COUNT at the screen for selecting an item.
2. Change the value using the numeric keys.
Press the reset key to clear the count.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Setting the booklet stapling position
1. Select SADDLE STAPLE ADJUST at the screen for selecting an item.
2. Select the size to be set.
3. Change the setting using the cursor up/down keys.
If the staple position is displaced toward the ejection side (copy sample 1), decrease the preset value. If
the staple position is displaced toward the feeding side (copy sample 2), increase the preset value.
Maintenance
item No.
Description
Description Setting
range Default
setting Change in value
per step
Adjustment of the paper stop timing in punch mode -10 to 10 0 0.24 mm
A
Preset value A: 5.5 2 mm (inch)
9.5 2 mm (metric)
+
-
+
-
Description Setting range Initial setting
Punch-hole scrap count
(current number of punching times) 0 to 9999999 -
Display Description Setting
range Default
setting Change in value
per step
A4R/8.5 x 11 Adjustment of booklet stapling position for
A4R/8.5 x 11 size
-10 to 10 0 0.55 mm
B4R/8.5 x
14 Adjustment of booklet stapling position for
B4R/8.5 x 14 size -10 to 10 0 0.55 mm
A3R/11 x 17 Adjustment of booklet stapling position for
A3R/11 x 17 size -10 to 10 0 0.55 mm