Kyocera TASKalfa 306ci, Service Manual

Page: 89 / 430

2R4/2R5/2R6-4
6-88
Contents
Turn the finisher's motors and solenoids on.
Purpose
Execute for the finisher's motors and solenoids operation check.
Method
1.Press the [Start] key.
2.Select the item to operate.
* :The screen for setting is displayed.
Method: Motor
1.Select the item to operate.
2.Press the [Start] key.
* :The operation starts.
U240 Finisher operation check
(Message: Chk Fin Ope)
Items Contents
Motor Finisher motor operation check
Solenoid Finisher solenoid operation check
Mail Box Mail Box motor operation check
Items Contents
Middle(H) Drive the DF middle motor (DFMM) at high speed.
Middle(L) Drive the DF middle motor (DFMM) at low speed.
Eject Pull(H) Drive the DF exit motor (DFEM) at high speed in the reversing direction.
Eject Pull(L) Drive the DF exit motor (DFEM) at low speed in the reversing direction.
Eject Conv(H) Drive the DF exit motor (DFEM) at high speed in the conveying direc-
tion.
Eject Conv(L) Drive the DF exit motor (DFEM) at low speed in the conveying direction.
Tray Drive the DF tray motor (DFTM).
Operation pattern: After descending to the lower limit, ascends and
descends again when passing 1s after detecting the middle sensor off.
Ascends again when detecting the middle sensor on and stops at the
upper limit.
Staple Drive the DF staple motor (DFSTM)
Staple Move Drive the DF slide motor (DFSLM)
Width Test(A4R) Drive the DF side registration motor 1,2 (DFSRM1,2)
Width Test(LTR) Drive the DF side registration motor 1,2 (DFSRM1,2)
Beat Drive the DF paddle motor (DFPDM)
Eject Unlock(HP) Drive the DF exit release motor (DFERM) at the home position
Eject Unlock(30) Drive the DF exit release motor (DFERM) at the 30-sheet bundle posi-
tion
Eject Unlock(50) Drive the DF exit release motor (DFERM) at the 50-sheet bundle posi-
tion