Kyocera TASKalfa 306ci, Service Manual

Page: 291 / 430

2R4/2R5/2R6
6-290
Contents
Sets the fuser temperature.
Purpose
Normally no need to change. However, change the setting as corrective measures for paper curl,
creases and fusing failure on thick paper.
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Setting: Center
1.Select the item to set.
2.By using the [+] [-] keys or the numeric keys, change the setting value.
*1
:35ppm model,
*2
: 40ppm model
3.Press the [Start] key to set the setting value.
Setting: Edge
1.Select the item to set.
2.By using the [+] [-] keys or the numeric keys, change the setting value.
U161 Fuser temperature adjustment
(Message: Adjust Fuser Control Temperature)
Items Contents
Center Set the center thermistor temperature.
Edge Sets the edge thermistor control temperature.
Items Contents Setting range Initial
setting
Data
varia-
tion
Pressure Start Sets the temperature to start
pressing 0 to 200 30 1°C
Drive Start Sets the drive start temperature 0 to 200 100 1°C
Ready Sets the Ready temperature 100 to 200
150
*1
/160
*2 1°C
Steady Sets the secondary stability
temperature 100 to 200
155
*1
/165
*2 1°C
Printing Set the temperature during
printing 100 to 200
160
*1
/170
*2 1°C
Waiting Set the standby temperature 100 to 200
150
*1
/160
*2
1°C
Items Contents Setting range Initial
setting
Data
varia-
tion
Ready Sets the Ready temperature 100 to 200
105
*1
/115
*2
1°C
Steady Sets the secondary stability
temperature 100 to 200
140
*1
/150
*2
1°C