Kyocera TASKalfa 306ci, Service Manual

Page: 357 / 430

2R4/2R5/2R6
6-356
Contents
Set permission/prohibition of the ID correction operation (calibration). Executes each setting of
the calibration.
Purpose
Execute the calibration setting when an image failure occurs or depending on the user’s request.
Execute Calibration when replacing the maintenance kit.
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Setting: Permission
1.Select [On] or [Off].
* :Initial setting: On
2.Press the [Start] key to set the setting value.
Setting: Time Interval
1.By using the [+] [-] keys or the numeric keys, change the setting value.
*1: 40 ppm model
* :Setting is changeable in 10 count increments.
2.Press the [Start] key to set the setting value.
U464 ID correction setting
(Message: Set ID Adjustment Mode)
Items Contents
Permission Permit/Prohibit Calibration
Time Interval Sets the time interval to execute calibration after completing printing.
Mode Color print mode setting
Leaving Time Setting the time to determine whether to execute calibration when recov-
ering from Sleep mode
Target Value Setting the target sensor value for the thick layer calibration and light
intensity calibration
Calib Executing Calibration
Items Contents
On Permitting Calibration
Off Prohibiting Calibration
Items Contents Setting
range
Initial setting
Time(sec) Calibration interval 0 to 9999
1200/900
*1
(sec)