Kyocera TASKalfa 306ci, Service Manual

Page: 295 / 430

2R4/2R5/2R6
6-294
5.Press the center of "+" as well as in the pro-
cedure 1.
6.Repeat 3 times.
7.[Initialize Completed] appears after setting
and the touch panel is automatically cor-
rected.
8.After finishing setting, the [Check] screen is
automatically displayed.
Method: Check
Single Tap Check
1.Press the indicated three "+", and then check
the display position.
2.Check that the gap of the X and Y axis of the
displayed coordinate is 6 or less.
* :If out of the specified value, select [Initial-
ize] and press the [Start] key to return to
Step. 1.
+
Press the center of the "+" sign.
*Press it using a tool with a fine tip.
If you cannot proceed to the next step, press the Stop key and try again.
Initialize completed.
+
+
Initialize
+
Single Tap Check.
Press the center of the "+" sign.
*Press it using a tool with a fine tip.
If you need to perform initialization again, select "Initialize" and press the Startkey.
Initialize
Multi Tap
Check
+
+
+
(13, -3)
(-8, 15)
(4, -1)
Single Tap Check.
Select "Mult Tap Check" and press the Startkey to go to the next step.
If you need to perform initialization again, select "Initialize" and press the Startkey.