Kyocera TASKalfa 306ci, Service Manual

Page: 358 / 430

2R4/2R5/2R6
6-357
Setting: Mode
1.Select the item to set.
* :Initial setting: Normal
2.Press the [Start] key to set the setting value.
Setting: Leaving Time
3.By using the [+] [-] keys or the numeric keys, change the setting value.
4.Press the [Start] key to set the setting value.
Setting: Target Value
1.Select the item to set.
2.By using the [+] [-] keys or the numeric keys, change the setting value.
*1: 40 ppm model
3.Press the [Start] key to set the setting value.
Method: Calib
1.Select the item to execute.
2.Press the [Start] key.
* :Calibration is started.
Same operation as [System Menu] - [Adjustment/Maintenance] - [Calibration].
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Items Contents
Short Color print mode setting: Short
Normal Color print mode setting: Normal
Long Color print mode setting: Long
Auto Color print mode setting: Auto
Items Contents Setting
range
Initial setting
Time(min) Setting the sleep timer 0 to 1440 1080 (min)
Items Contents Setting
range
Initial setting
Thickness(C) Toner layer calibration (Cyan) 0 to 1000
680/930
*1
Thickness(M) Toner layer calibration (Magenta) 0 to 1000
610/900
*1
Thickness(Y) Toner layer calibration (Yellow) 0 to 1000
540/870
*1
Thickness(K) Toner layer calibration (Black) 0 to 1000
700/170
*1
Gamma(C) Light amount calibration (Cyan) 0 to 1000
445/430
*1
Gamma(M) Light amount calibration (Magenta) 0 to 1000
445/430
*1
Gamma(Y) Light amount calibration (Yellow) 0 to 1000
375/360
*1
Gamma(K) Light amount calibration (Black) 0 to 1000
465/430
*1
Items Contents
Regist Execute the registration correction calibration
Full Executes Full Calibration