Kyocera TASKalfa 306ci, Service Manual

Page: 54 / 430

2R4/2R5/2R6
6-53
Contents
Set the primary transfer control voltage
Purpose
Change setting if a failure such as faint image, etc. occurs.
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Setting: Normal
1.Select the item to set.
2.Press the [
Ż ] [ Ź ] keys or the numeric keys to change the counter value.
3.Press the [Start] key to set the setting value.
Setting: Add Color
1.Select the item to set.
2.Press the [
Ż ] [ Ź ] keys or the numeric keys to change the counter value.
3.Press the [Start] key to set the setting value.
U101 Primary transfer voltage adjustment
(Message: 1st TC Output)
Items Contents
Normal Set the primary transfer voltage
Add Color Sets 2nd side additional value
Add Color 2nd Sets 2nd side additional value.
Surround Correct Setting the environmental correction
Items Contents Setting range Initial
setting
Data
varia-
tion
Full Yellow primary transfer voltage (full
speed) 0 to 400 70 -
Half Yellow primary transfer voltage (half
speed) 0 to 400 43 -
3/4 Yellow primary transfer voltage (3/4
speed) 0 to 400 56 -
Items Contents Setting range Initial
setting
Data
varia-
tion
C Sets the additional value (Cyan) -200 to 200 -4 -
M Sets the additional value (Magenta) -200 to 200 -4 -
Y Sets the additional value (Yellow) -200 to 200 0 -
K Sets the additional value (Black) -200 to 200 17 -
B/W Monochrome mode (toner applying
amount) -200 to 200 -27 -