Kyocera TASKalfa 306ci, Service Manual

Page: 144 / 430

2R4/2R5/2R6
6-143
Setting: System
1.Select the item to set.
2.Press the [
Ż ] [ Ź ] keys or the numeric keys to change the counter value.
3.Press the [Start] key to set the setting value.
Supplement
Test copy of the original is available by pressing the [System Menu/Counter] key as interruption
copy mode when executing this maintenance mode.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Contents
Execute the LSU cleaning by operating the LSI cleaning motor. Also, sets the cleaning operation
interval.
Method
1.Press the [Start] key.
2.Select the item to execute.
Method: Execute
1.Press the [Start] key.
* :The LSU slit glass is cleaned.
Setting: Cycle
1.Select the item to set.
2.Press the [
Ż ] [ Ź ] keys or the numeric keys to change the counter value.
*1
: Set in 100 sheet increments
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Items Contents Setting
range
Initial setting
Y Compression rate of the brightness 1 to 100 90(%)
CbCr Compression rate of the color difference 1 to 100 90(%)
U474 Checking the LSU cleaning
(Message: Chk LSU Cleaning)
Items Contents
Execute Executes the cleaning operation.
Cycle Sets the cleaning cycle.
Items Contents Setting range Initial set-
ting
Cnt Sets the cleaning cycle.
0 to 5000
*1 1000
Timing Sets the LSU cleaning timing Print (during job)
Print End (after complet-
ing job) Print End