Kyocera TASKalfa 306ci, Service Manual

Page: 132 / 430

2R4/2R5/2R6
6-131
Contents
Set permission/prohibition of the ID correction operation (calibration). Executes each setting of
the calibration.
Purpose
Execute the calibration setting when an image failure occurs or depending on the user’s request.
Execute Calibration when replacing the maintenance kit.
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Setting: Permission
1.Select [On] or [Off].
* :Initial setting: On
2.Press the [Start] key to set the setting value.
Setting: Time Interval
1.Press the [ Ż ] [ Ź ] keys or the numeric keys to change the counter value.
* :Setting is changeable in 10 count increments.
2.Press the [Start] key to set the setting value.
U464 ID correction setting
(Message: Set ID Adj Mode)
Items Contents
Permission
Permit/Prohibit Calibration
Time Interval
Sets the time interval to execute calibration after completing printing.
Mode
Color print mode setting
Leaving Time
Setting the time to determine whether to execute calibration when recov-
ering from Sleep mode
Target Value
Setting the target sensor value for the thick layer calibration and light
intensity calibration
Calib
Executing Calibration
Items Contents
On
Permitting Calibration
Off
Prohibiting Calibration
Items Contents Setting
range
Initial setting
Time(sec) Calibration interval 0 to 9999 1200 (sec)