Kyocera TASKalfa 306ci, Service Manual

Page: 309 / 430

2R4/2R5/2R6
6-308
Contents
Displays each switch and sensor status of the document processor.
Purpose
Execute to check the operation of switches and sensors of the document processor.
Method
1.Press the [Start] key.
2.Check the switches and sensors by manually turning them on/off.
* :The switch indication is inversed when the switch is detected.
*1: Simultaneous duplex scan model only, *2: Other than simultaneous duplex scan model
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Contents
Displays messages indicated on the touch panel of the operation panel.
Purpose
Execute to check messages indicated.
Method
1.Press the [Start] key.
2.Using the [
Ÿ ] [ ź ] key, display messages in order.
* :Enter the message number using the numeric keys to display the message of the desig-
nated number.
3.By using the [+] [-] keys key, switch the language.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U244 DP switch check
(Message: Check DP Switches)
Items Contents
Feed *2 Check the DP feed sensor (DPFS).
Regist Checks the DP registratio sensor (DPRS)
Timing *1 Check the DP timing sensor (DPTS).
CIS Head
*1
Check the DPCIS sensor (DPCS).
Set Checks the DP original sensor (DPOS)
Longitudinal Check the DP original length switch (DPOLSW).
Cover Open Check the DP interlock switch (DPILSW)
Open Checks the DP open close switch (DPOCSW)
Eject *1 Check the DP eject sensor (DPES).
U245 Checking the message
(Message: Check Display Message)