Kyocera TASKalfa 306ci, Service Manual

Page: 138 / 430

2R4/2R5/2R6
6-137
Contents
Corrects the color registration data.
Purpose
Execute when replacing the laser scanner unit.
* :Make sure to execute U464 Calib before executing this maintenance mode.
Method
1.Press the [Start] key.
2.Select the item to set.
* :Select [Auto] to output the automatic adjustment chart.
* :Select [Manual] to enter the setting display.
Method: Auto
1.Select the item to execute.
Method: Print
1.Press the [Start] key.
* :Output the automatic adjustment chart.
Method: Execute
1.Place an original on the table and press the [Start] key.
* :Execute the automatic adjustment.
2.When adjustment has normally completed, [OK] is displayed.
* :An error code appears when there is an error.
Error codes list
U469 Color registration adjustment
(Message: Adj Cor Reg)
Items Contents
Auto Adjust the color registration automatically
Manual Adjust the color registration manually
Items Contents
Print Output the automatic adjustment chart.
Execute Start scanning and execute the automatic adjustment.
Error codes Place of occurrence Factor
S001 Scanner Original reference patch is not detected
S002 Scanned image position shifted in excess in the
main scanning direction.
S003 Scanned image position shifted in excess in the
sub scanning direction.
S004 Original skew is in excess
S005 Original type mismatch
SFFF Other scanning error
E001 Engine Engine error
CFFF Controller Other errors