Kyocera TASKalfa 306ci, Service Manual

Page: 94 / 430

2R4/2R5/2R6
6-93
Contents
Execute adjustment for the finisher installation.
Purpose
Front/rear width adjuster home position adjustment
Adjust when the consistency of the side registration guides and paper is not good and paper jam
occurs.
Front/rear staple home position adjustment
Adjust if the staple is not centered on the paper in the staple mode.
Method
1.Press the [Start] key.
2.Select [Finisher].
* :The screen for setting is displayed.
Method: Finisher
1.Select the item to set.
Setting: Width Front HP / Width Tail HP
1.Select [Width Front HP].
2.Press the [
Ż ] [ Ź ] keys or the numeric keys to change the counter value.
3.Press the [Start] key to set the setting value.
4.Press the [Stop] key to return to the screen to select the maintenance item No.
5.Enter U240 and select [Motor] and then [Width Test(A4R)].
* :The middle tray side registration guides move to A4R size position.
6.Insert paper into the side registration guides to check the consistence.
7.Repeat the above adjustment until the consistency is appropriate.
U246 Finisher adjustment
(Message: Adj Fin)
Items Contents
Finisher Setting the finisher adjustment value
Items Contents
Width Front HP Front width adjuster home position adjustment
Width Tail HP Rear width adjuster home position adjustment
Staple HP Front/rear staple home position adjustment
Content to adjust Setting
range
Initial setting Data varia-
tion
Front width adjuster home position adjust-
ment -30 to 30 0 0.973mm
Rear width adjuster home position adjustment -30 to 30 0 0.973mm