Kval Edge-SS, Operation & Service Manual

Page: 81 / 180

About the Tool Config Tabs
KVAL Operation/Service Manual
2-46
About the Tool Config Tabs
The
Edge-SS
interfaces contain tool configuration abilities.
Tool configuration can improve the speed and quality of cut by defining tool specifications, types
of materials being machine, parameters of the cut, and the frequency of the motor.
At this screen, specifications of the tool, type of material being cut, and process is entered and
saved to the database. This information is valuable to compute and provide the most precise cut
available.
Note: The Screen shot below is a from a sample machine.
General Operating Controls
The
Tool Config Screen
contains a sample of the following:
• List of the available tools.
• Pop-up menus to enter information about each tool (Specifications)
• The ability to adjust the method of chisel operation during machining.
• The ability to enable or disable specific tool slots
• The ability to name the tools to familiar names.
• The ability to lock and unlock the ability to enter data.
• Change the rate of machining (feed-rate, spindle speed, plunge feed, entry feed,
perimeter feed)
• Parameters of the cut (depth, passes through material, overlaps, skin priority)
• Chisels: Can change peck count (start of cut), corner location, and rate of machin-
ing.
Select Tab
Select Tab
List of Tools
Available
Pop-Up Menus: enter
tool data.(Router and
Drill)
Unlock, Lock, and
Save Data