Kval Edge-SS, Operation & Service Manual

Page: 78 / 180

About the Edge SS Manual Servo Control Tab
2-43
KVAL Operation/Service Manual
About the Edge SS Manual Servo Control Tab
Select the
Manual Servo Control Tab
to jump to the screen. At this screen, the
Main Head
and
Table
servo motors can be moved manually. Table controls include moving the
Feeler
and the
Feeder
.
Table Feed
Control is an
Optional Fea-
ture
FIGURE 2-5.
Edge-SS Manual Control Screen
About the Edge-SS Feeler Servo Controls
These controls operate the
Thickness Feeler
. The feeler uses encoder technology to accu-
rately measure the thickness of a door. For information about the Feeler, see “About the
Door Length Feeler” on page 6-8
LengthFeelerEncoder: Dis-
plays the Count Position of the
Feeler Encoder.
Feeler Forward: Press
and Hold to move the
feeler forward. (Toward
from the door)
Feed Reverse: Press and
Hold to move the feeler in
reverse. (Away from the
door)
Feeler Retracted: Press
to toggle feeler contacts to
and away from the door.