Kval Edge-SS Operation & Service Manual Download Page 29

Page: 29 / 180

A pop-up window is displayed.

Accept the request to run the program.

Note:

Security settings may differ from

plant to plant. If issues occur, contact
your IT department.

The interface of the

KVAL Support App

will be dis-

played. Enter your name in the

Your Name

field.

The fields are described below:

Session code:

An internal number to track this

machine. It is auto filled.

Allow Remote Control:

Program is ready to allow

technicians to access machine computer

Your Name Field:

Enter your name. The KVAL tech-

nician will use this field to identify this machine.

Description:

Enter machine Serial number and

issue.

Indicator:

Green indicates there is a good connec-

tion to the service center. If red, there could be an
issue with a LAN connection. Check the connections
in the plant.

After the

KVAL Support App

loaded and completed, call the
KVAL service center(1-800-553-
5825) and have the technician con-
nect to the machine computer.

Click the

Allow

button to give the

KVAL service technician permis-
sion to access the operator station.

We are now ready to troubleshoot.

How to Download the Service Application

1-17

KVAL Operation/Service Manual

Summary of Contents for Edge-SS





















































































































































































Search results

Summary of Contents for Edge-SS

Reviews:

Related manuals for Edge-SS

Brands by name

Popular brands

Kval Edge-SS, Operation & Service Manual

Search results

Summary of Contents for Edge-SS

Reviews:

Related manuals for Edge-SS

Brands by name

Popular brands