Kval Edge-SS, Operation & Service Manual

Page: 39 / 180

Front View of the Edge-SS
KVAL Operation/Service Manual
2-4
Front View of the Edge-SS
At the front of the machine the operator controls the door through the process. This includes load-
ing templates of the cut to be performed, controlling the path of the door, positioning the door, and
feeding the door thorough to the next machine. The
Figure below identifies major assemblies and
controls.
Cutting Head: Work Horse. Servo
Driven Tool Carriage to rout and drill
the edge of a door.
Operator Station:
The Operator’s Station includes a
touch screen and keyboard to run
the program that operates the
machine.
Note: Multiple machine controls
may combined in one station
(Machine Combinations are Cus-
tomer Definable)
Foot Pedal Controls:
Door Stops
Door Clamps
Emergency Stop
Fence, Clamps:
The Fence acts like a reference to
align the door. The clamps hold the
door in place in processing.
Stops: Stops are located both
sides of the table and are
identified by software.
Machine Controls
Edge Pos Lights
Start Seq. Button
Edge Toggle
‘Door Finished
Scanner
Door Stops
Door Clamps
Emergency Stop
FIGURE 2-1.
Tour of Front of the Machine