Kval Edge-SS, Operation & Service Manual

Page: 54 / 180

Machine Start Summary
2-19
KVAL Operation/Service Manual
Machine Start Summary
This is a summary of the start sequence for the Edge-SS Line. These instructions assume that a
Door Job has been created to be used in the machining process. To learn more about Door Jobs
and Templates,
see “About the Libraries Screen” on page 2-27.
Ensure factory air and power is present at the machine. For more information: See
“Initial Powering Operations for the Edge-SS Line” on page 2-16
1.
Ensure the machine main
Air Supply Valve
is on.
2.
Turn on the
Red Power Lever at
each
Electrical Panel
.
3.
Turn on each
Green Control Transformer Lever
on the Operators Station.
Press each
Green Start Button
on the Operators Station to boot-up into Desktop
environment.
After the computer is completed booting up, the
KvalCAM User Interface
will start
automatically.
However, for instruction purposes, below are manual steps to start the programs
Double Click the
KvalCAM.exe
desktop icon.
KvalCAM will boot-up to the
Machine Line
Screen
Select the
Home Machine Line Button.
Every
machine in the line will
Home
. On comple-
tion, each machine status will display
Idle
in
the
Machine Feedback Status box.
For more information: See “Home the
Machine Line” on page 2-18 .