Krone Comprima F 155 XC, Original Operating Instructions, Page: 224 / 278

19 Malfunction, cause and remedy
19.2 Disturbances during or after the baling process
224
Comprima F 155 XC
Original Operating Instructions 150001050_01_en
Malfunction: The tailgate cannot be opened.
Possible cause Remedy
The hydraulic hose line for
"Opening/closing tailgate" has
not been correctly connected. „ Connect the hydraulic hose line for "Opening/closing
tailgate",
refer to page 55 .
Malfunction: The round bale is conically shaped.
Possible cause Remedy
The bale chamber is filled on
one side. „ Fill the bale chamber evenly, refer to page 69 .
The tractor with machine was
driven too quickly at the end
of the baling process.
„
Slow down at the end of the baling process.
Net wrapping: The number of
net layers is too low.
„
Increase the number of net layers via the terminal, refer to
page 140 .
The wrapping material is torn.
„
Use only wrapping material of the designated quality.
KRONE recommends one of the "KRONE excellent"
products, see label on the machine with the number
27 016 326 *.
Malfunction: The round bale is barrel-shaped. This causes the wrapping material to tear open
in the middle.
Possible cause Remedy
The bale chamber is filled un-
evenly. „
Drive over the swath on alternate sides, refer to page 69 .
The number of layers of wrap-
ping material is too low. „ Increase the number of layers.
Net wrapping:
refer to page 140 .
Chamber film wrapping: refer to page 140
The wrapping material brake
has been set too forcefully. „
Adjust the wrapping material brake, refer to page 176 .