Krone Comprima F 155 XC Original Operating Instructions Download Page 136

Page: 136 / 278

Terminal menus

15.3

Selecting a menu Level

136

Comprima F 155 XC

Original Operating Instructions 150001050_01_en

Icon

Designation

Explanation

Sensor test

Quick access to the sensor test of the
sensors responsible for this menu.

Actuator test

Quick access to the actuator test of the ac-
tuators responsible for this menu.

Disk

The mode or value is saved.

Plus

Increase the value.

Minus

Reduce the value.

Right arrow

Display next mode.

Left arrow

Display previous mode.

15.3

Selecting a menu Level

To bring up the menu level from the working screen, press

The display indicates the menu level.

Return from the menu pages to the main menu:

Keep pressing

until the main menu appears.

For an overview of the menus:

refer to page 134

15.4

Selecting a menu

Calling up menu

The menus are selected depending on used terminal (touch sensitive or not touch sensitive).

For version with “Touch sensitive and not touch sensitive terminal”

By means of adjacent keys

To select a menu, press the keys next to

until the desired menu is selected.

The selected menu is highlighted in colour.

To call up the menu, press the key next to

The menu opens.

Summary of Contents for Comprima F 155 XC























































































































































































































































































Search results

Summary of Contents for Comprima F 155 XC

Reviews:

Krone Comprima F 155 XC, Original Operating Instructions, Page: 136 / 278

Search results

Summary of Contents for Comprima F 155 XC

Reviews: