manualshive.com logo in svg

Krone Comprima F 155 XC, Original Operating Instructions, Page: 114 / 278

Share
Download
Krone Comprima F 155 XC Original Operating Instructions Download Page 114

12

KRONE ISOBUS terminal (CCI 800, CCI 1200)

12.2

Switching terminal on/off

114

Comprima F 155 XC

Original Operating Instructions 150001050_01_en

12.2

Switching terminal on/off

1

1

EQ001-174

KRONE ISOBUS terminal CCI 1200

KRONE ISOBUS terminal CCI 800

„

Before switching on the terminal for the first time, check that the connections are correct and
tight.

INFORMATION

When the terminal is switched on for the first time, the machine configuration is loaded into
the terminal and saved in the terminal memory. Loading may take a few minutes.

Switching ON

„

Press and hold down the key (1).

ð

If the machine is not connected, the display shows the main menu after switching on.

ð

If the machine is connected, the display shows the road travel screen after switching on.

Æ

The terminal is ready to operate.

If machine is not connected: “Main menu”

If machine is connected: “Road travel screen”

EQG000-056

The display appears in landscape mode after starting the terminal. Refer to the CCI terminal
operating instructions if you want the display in portrait rather than landscape mode or if you
wish to expand the terminal applications to full view.

Switching off

„

Press and hold down the key (1).

Summary of Contents for Comprima F 155 XC























































































































































































































































































Reviews:

No comments