manualshive.com logo in svg

Krone Comprima F 155 XC, Original Operating Instructions, Page: 119 / 278

Share
Download
Krone Comprima F 155 XC Original Operating Instructions Download Page 119

Terminal machine functions

14

Keys

14.2

Comprima F 155 XC

Original Operating Instructions 150001050_01_en

119

Icon

Explanation

For version with "Hydraulic blade group control system"

A

Blade group A swivelled in.

AB

Blade groups A and B swivelled in.

B

Blade group B swivelled in.

Blade groups A and B swivelled out.

Blade groups A and B swivelled out and blade cassette is down to remove the
blades (deactivated).

For the “Working lights” version

Switched on.

Switched off.

14.2

Keys

The available icons comply with the equipment of the machine. The following represented icons
are not always available.

Icon

Designation

Explanation

Feed net in manual mode.

Press the key to guide the net to the round
bale.

Feed film in manual mode.

Press the key to guide the film to the round
bale.

Switch net wrapping to
automatic mode.

The previously selected type of operation,
manual mode or automatic mode, in the
set type of tying is displayed on the key.
The type of operation is changed by press-
ing the key.

Switch net wrapping to
manual mode.

Switch chamber film wrap-
ping to automatic mode.

The previously selected type of operation,
manual mode or automatic mode, in the
set type of tying is displayed on the key.
The type of operation is changed by press-
ing the key.

Switching chamber film
wrapping to manual mode

Pre-select pick-up.

The setting previously selected, pick-up or
blade adjustment is displayed. Press the
key to change the setting.

Pre-select blade adjust-
ment.

Summary of Contents for Comprima F 155 XC























































































































































































































































































Reviews:

No comments